M3 Series
Simple is the new black. In the design world, simplicity is the ultimate buzzword, but the hardest to achieve. The new M3 Series has achieved it, by going back to the basics. Just one look at its simple, clean lines and minimal yet bold contours, and you will fall in love with it. The sweeping touch of black against your choice of a silver or white cover gives the M3 a choice of a silver or white cover gives the M3 a sense of classic elegance that is so refreshing in a water heater design. It is time you added that level of style to your own home.
Safety Features
-
Built-in Earth Leakage Sensing Device (Optional Double Poles)
-
Line Fault Indicator
-
Splash Proof Casing - IP25 Standard
-
Flow Switch System
-
Thermal Cut-out
-
Lightning & Surge Protector
Basic Features
-
Electronic Temperature
Control
-
Full Nylon Fibre Internal Construction
-
5-Spray Selection Handshower
Technical Specification
|
Heater Rating
|
3.5 to 5.5kW, 220 - 240V~ 50Hz |
Operating Condition |
Open Outlet
|
Protection Against Electric Shock |
Class 1 |
Water Temperature Control |
Electronics |
Degree of Protection |
IP25 |
Minimum Flow Rate |
3 liter / minute |
Heater Dimension |
M3EP - 230mm(W) x 380mm(L) x 85mm(H) |
Minimum Pressure |
20 kPa (0.2 bar/2.9 psi) |
Maximum Pressure |
0.3 MPa (3 bar/43.5 psi) |
Nett Weight |
M3EP - 3.0kg |
| |
|
Motor Type |
AC Pump |
Noise Level |
<70dB |
Nett Weight |
120W 240V ~ 50Hz |
*Specifications and products shown are correct at the time of printing and may subject to change without prior notice. |
|
M3EP C/W ELSD and AC booster pump
|
|
| |
| |
|
